Memory And Data Output Features; Serial Patient Data Output - Nonin 7500FO Manual Del Operador

Memory and Data Output Features

Memory and Data Output Features
The Model 7500FO provides real-time (serial) patient data output, as well
as analog output signals for SpO

Serial Patient Data Output

This device features real-time data output capabilities. The serial format
includes an ASCII header containing model number, time, and date
information.
The device provides real-time data output capability via the serial
connector port. The 7500 SC cable, available from NONIN, may be used
to connect the Model 7500FO to the receiving computer. The information
from the Model 7500FO is sent in an ASCII serial format at 9600 baud with
8 data bits, 1 start bit, and 2 stop bits. Each line is terminated by CR/LF.
Data from the device are sent once per second in the following format:
SPO =XXX HR=YYY
2
NOTE:
Pressing the ON/STANDBY button will insert a "*" at the end of the
corresponding printed line to serve as an event marker.
Pin Number
2
Analog Output, SpO
1
2 No Connect
3 Serial Data Output
4 Analog Output, Pulse Rate
5 Ground
6 No Connect
7 Event Marker
8 No Connect
9 5V, 250 mA Accessory Power Supply
, pulse rate and event markers.
Pin Assignment
2
25