Corghi EM 7240 Manual De Uso página 61

Fixing the machine to the ground (Fig. 6)
- The machine is to be fixed to the ground if:
- it does not have the accessory triangular foot;
- if it does have the accessory triangular foot but is going to be used with wheels heavier
than 50Kg. In such a case the triangular foot will have to be removed in order to fix the
front bracket.
- Undo the three hex head screws M8x60 fixing the machine to the pallet; remove the plastic
washers from between the body and the three L shaped brackets: these brackets are used to fix
the machine to the ground;
- put the brackets back on the machine in the original position, without locking the screws;
- Position the machine on the ground in the selected position and make sure that the surrounding
spaces are at least those indicated in Fig. 5/5a;
- Make a mark on the floor where to drill;
- drill where the marks are and then take the Fischer M8 anchors supplied and insert them in the
holes just made;
- Anchor the machine to the ground, fixing the L shaped brackets to the Fischers using the relative
screws and washers (fig.6);
- Lock the three securing screws to the body.
EM 7240 Operator's manual
600
5
6
1000
1000
5a
61
UK