Introduction - Corghi EM 7240 Manual De Uso

INTRODUCTION

The purpose of this manual is to provide the owner and operator with effective and safe
instructions for the use and maintenance of the wheel balancer.
Follow all of the instructions carefully and your machine will assist you in your work and
give long-lasting and efficient service, in keeping with manufacturer traditions.
The following paragraphs define the levels of danger regarding the machine, associated
with the warning captions found in this manual.
DANGER
Immediate danger, causing serious injury or death.
WARNING
Danger or unsafe procedures that could cause serious injury or death.
CAUTION
Danger or unsafe procedures that could cause minor injury or material damage.
Read these instructions carefully before powering up the equipment. Keep this manual
and all illustrative material supplied with the machine in a folder near the tyre changer,
where it is readily accessible for consultation by the machine operator.
The technical documentation supplied is considered an integral part of the machine and
must always accompany the equipment if it is sold or transferred to a new owner.
The manual is only to be considered valid for the machine of the model and serial number
indicated on the nameplate applied to it.
WARNING
The instructions and information described in this manual must always be complied
with: the operator will be held responsible for any operation not specifically described
and authorised in this manual.
NOTE
Some of the illustrations in this booklet are based on photos of prototypes: standard
production machines may differ slightly in certain respects.
These instructions are for the attention of personnel with basic mechanical skills. We have
therefore condensed the descriptions of each operation by omitting detailed instructions
regarding, for example, how to loosen or tighten the fixing devices on the machine. Do not at-
tempt to carry out procedures which exceed your level of proficiency, or which you do not have
experience with. If necessary, please contact an authorised Service Centre for assistance.
56 EM 7240 Operator's manual