Maintenance; Information Regarding Machine Demolition - Corghi EM 7240 Manual De Uso

WARNING
The company is not to be held responsible for any claims deriving from the use of
non-original spare parts or accessories.
WARNING
Unplug the machine from the socket and make sure that all moving parts have been
locked before performing any adjustment or maintenance operation.
Do not remove or modify any part of the machine (except for service interventions).
CAUTION
Keep the work area clean.
Never use compressed air and/or jets of water to remove dirt or residues from the machine.
Take all possible measures to prevent dust from building up or raising during clean-
ing operations.
Keep the wheel balancer shaft, the securing ring nut, the centring cones and flanges clean.
These components can be cleaned using a brush previously dripped in environmentally
friendly solvents.
Handle cones and flanges carefully so as to avoid accidental dropping and subsequent
damage that would affect centring accuracy.
After use, store cones and flanges in a place where they are suitably protected from dust
and dirt.
If necessary, use ethyl alcohol to clean the display panel.
Perform the calibration procedure at least once every six months.
INFORMATION REGARDING MACHINE
If the machine is to be scrapped, separate all electrical, electronic, plastic and ferrous
components.
Dispose of them separately, as provided for by local regulations in force.
100

MAINTENANCE

DEMOLITION
EM 7240 Operator's manual