Waring Commercial WW150E Manual página 4

05wi31012_ww150e_ib
must be connected to the terminal which is marked with the
letter L, or colored Red or Brown.
NOTE: If the terminals of the plug are unmarked or if you
are in any doubt, consult a qualified electrician. If a BS1363
Fused Plug is used, this must be fitted with the correct
amperage fuse – 13A. This applies to UK models only.
SPECIAL CORD SET INSTRUCTIONS
A short power-supply cord is provided to reduce the risks
resulting from becoming entangled in or tripping over a
longer cord. Longer extension cords are available and may
be used if care is exercised in their use.
If a long extension cord is used, the marked electrical rating
of the extension cord should be at least as great as the
electrical rating of the appliance, and the longer cord should
be arranged so that it will not drape over the countertop or
tabletop where it can be pulled on by children or animals,
or tripped over.
INSTRUCTIONS FOR USE
1. Before using your Waring
Maker for the first time, remove any dust from shipping
by wiping the plates with a damp cloth. Remove all
protective paper and wrapping.
2. Plug cord into 230V AC wall or outlet.
Switch the toggle switch to the on position. The red
light will go on to signal power. The waffle maker will
now begin the preheating process. This should take
about 4 minutes. The waffle maker will sound 6 beeps
and the green indicator light will go on to signal the
unit is ready for baking.
For initial use, it is important that the waffle maker
be preheated before seasoning. To season, spray
the hot grids with cooking spray or brush them
with a flavorless oil. Then wipe with a paper towel
or pastry brush.
10/14/05 11:04 AM Page 4
™
3
Commercial Belgian Waffle