Idiomas disponibles
Idiomas disponibles
Ice Cream Hardening Cycle
The ice cream hardening cycle is a timed freezing
cycle. Temperature, duration and fan speed can be
set. The system proposes following screenshot:
By pressing the area
possible to change the cell operating temperature.
By pressing the area
possible to change the duration of the freezing
cycle.
By pressing the area
possible to change the fan speed.
Sterilization Cycle
The running of the cycle is allowed only with the
door closed and is immediately interrupted in the
event that, during sterilization, the door is open.
For a correct efficiency and hygiene of the machine
it is recommended to perform the disinfection of the
cell at the end of each shift.
To run the cycle it is necessary to close the door of
the blast chiller and press in correspondence of the
area
.
To run the cycle press in correspondence of the
area
.
During a current cycle, following screenshot will be
displayed :
it is
it is
Pressing on the area
temperatures detected by the various probes, the
state of inputs / outputs and the alarms stored by
it is
the system. To abort the current cycle press for at
least three seconds the area
During a current cycle, following screenshot will be
displayed :
Pressing on the area
temperatures detected by the various probes, the
state of inputs / outputs and the alarms stored by
the system.
To abort the current cycle press for at least three
seconds the area
29
ENGLISH
the display show the
.
the display show the
.
GB
