Retigo 5T Manual De Instalación, Uso Y Mantenimiento página 62

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
!
This equipment has not been designed to be
installed in a potentially explosive atmosphere.
Replacement of the power cord must be
performed by qualified personnel.
,
Specific adhesives highlight the presence of
mains voltage in the proximity of areas (however
protected) with risks of an electrical nature.
!
Before connection, ensure that the means for
GB
disconnecting the equipment from the mains are
incorporated
accordance with the installation rules (required for
equipment supplied without a plug to be connected
to a permanent installation).
!
During the installation of the equipment, it is
not allowed the transit or the permanence of people
not involved in the installation near the working
area; use individual protection devices (gloves,
safety shoes, etc.) and operate in compliance with
the rules related to the safety at work.
!
In the design and construction phase, the
manufacturer has paid particular attention to the
aspects that can cause risks to safety and health of
persons that interact with the equipment.
Carefully read the instructions in the manual
provided and those applied directly, especially
those concerning safety.
!
Do not tamper with, evade, eliminate or by-
pass the installed safety devices. Failure to comply
with this requisite can lead to serious risks for
personal health and safety.
It is recommended to simulate some test
manoeuvres to identify the controls, in particular
those relative to switch-on and switch-off and their
main functions.
into
the
fixed
installation
The appliance is only destined for the use for
which it has been designed; any other use must be
considered improper.
!
The manufacturer declines all liability for any
damage to objects or injury to persons owing to
improper or incorrect use.
!
All maintenance interventions that require
precise technical skill or particular ability must be
performed exclusively by qualified staff.
in
!
When using the appliance, never obstruct the
air inlet of the condensing unit when the appliance
is on, so as not to compromise its performance and
safety.
!
Never stretch the power cable.
In order to guarantee hygiene and protect the
foodstuffs from contamination, the elements that
come into direct or indirect contact with the
foodstuffs must be cleaned very well along with the
surrounding areas. These operations must only be
performed using detergents that can be used with
foodstuffs, avoiding inflammable products or those
that contain substances that are harmful to
personal health.
In the case of prolonged inactivity, as well as
disconnecting all the supply lines, it is necessary to
accurately clean all internal and external parts of
the appliance.
4
loading

Este manual también es adecuado para:

6t5t 1/15t 1/1 700