Idiomas disponibles
Idiomas disponibles
4.7.
Personal Protective Equipment
The identification and selection of appropriate
personal protective equipment is the responsibility
of the employer or workplace manager or service
technician.
Operators are required to wear the identified
equipment.
Task
Transport and
handling
Unpacking
Assembly
Ordinary use
Ordinary cleaning
Extraordinary
cleaning
Maintenance
Dismantling
Scrapping
■
Mandatory personal protective equipment (MPPE)
□
Personal protective equipment (PPE) to be used if necessary
4.8.
Further risks
The proper design of the equipment and the
installation
of
adequate
completely exclude risks to the operator.
This
manual
lists
the
equipment to be used by the operator.
Sufficient space is provided during the installation
of the equipment to limit the risks. To maintain
these conditions, the areas surrounding the
equipment must be kept clean, dry, well lit and free
of obstacles.
The following is a list of possible risks that may still
occur.
Possible
risks
The operator may slip due to
Slip or fall
water, oil or dirt on the floor.
The
user
unintentionally touches certain
Burns
components inside the appliance
Abrasion
(e.g. cold pans, cooling fins and
cooling circuit tubes) without
wearing protective gloves.
Protective
Safety shoes
clothing
■
■
■
■
■
□
■
□
■
□
■
□
■
□
■
protection
do
not
personal
protective
Description
intentionally
or
Durante l'uso ordinario, i guanti proteggono le mani
dalla teglia fredda.
Di seguito l'elenco dei principali dispositivi di
protezione individuale (DPI) da utilizzare durante le
varie operazioni di lavoro.
Gloves
□
□
□
□
■
■
□
□
□
Possible risks
Contact with live electrical parts
during maintenance operations
Electrocution
performed
disconnecting
supply.
The operator intervenes on the
equipment
Fall
means to access the upper
part.
The upper control panel may
not be secured properly by
Injuries
qualified personnel. It may
close abruptly.
During
packaging handling operations
Tipping
using unsuitable lifting and/or
handling equipment or with an
unbalanced load
Inhalation of cooling gas. The
type of refrigerant can be found
Cooling gas
on
identification plate.
9
ENGLISH
Helmet or
Glasses
hard hat
□
□
□
Description
without
the
power
using
unsuitable
equipment
and
the
equipment's
GB
