Idiomas disponibles
Idiomas disponibles
Fish Sanitization Cycle
The function "Fish Sanitization" is divided into three
phases :
1. negative temperature blast chilling phase
2. maintaining phase
3. conservation phase
By selecting the sanification cycle the system
shows the first phase screen :
By pressing the area
possible to change the operating cell temperature
during the blast chilling phase.
By pressing the area
possible to change the product temperature at the
end of the cycle.
By pressing the area
possible to change the fan speed.
Press in correspondence of the area
top to step to the second phase.
By pressing the area
possible to change the operating temperature of
the cell during the maintaining phase.
By pressing the area
possible to change the duration of the maintaining
phase.
By pressing the area
possible to change the fan speed.
Press in correspondence of the area
top to step to the third phase.
By pressing the area
possible to change the operating cell temperature
during the conservation phase.
By pressing the area
it is
possible to change the fan speed.
To run the cycle press in correspondence of the
it is
area
During a current cycle, following screenshot will be
displayed :
it is
at the right
it is
Pressing on the area
temperatures detected by the various probes, the
state of inputs / outputs and the alarms stored by
it is
the system. To abort the current cycle press for at
it is
least three seconds the area
27
ENGLISH
.
Number of the current phase
Elapsed time
the display show the
at the right
GB
it is
it is
.
