Idiomas disponibles
Idiomas disponibles
ENGLISH
Code
NEEDLE
PROBE
POWER
FAILURE
NEEDLE PRB INS
FISH SAN.
GB
SANITIZATION
DURATION
CONDENSER
OVERHEAT
COMPRESSOR
BLOCKED
NEEDLE PROBE
INS.
Causes
Core probe alarm (all enabled core probe
sensors are in alarm)
Power failure alarm (HACCP alarm).
Product probe insertion alarm during the fish
sanitizing cycle.
The fish sanitizing cycle has concluded beyond
the maximum duration allowed (HCCP alarm)
The temperature of the condenser has exceeded
the first limit imposed.
•
The condenser fan will be turned on
•
The alarm output will be activated.
The temperature of the condenser has exceeded
the second limit imposed.
•
It will not be allowed either select or start any
operating cycle.
•
If the error occurs during an operating cycle,
the cycle will be interrupted
•
The alarm output will be activated.
Product probe insertion alarm during a blast
chilling / freezing cycle.
Verify the connection device -
Verify the proper insertion of the
Verify the proper insertion of the
Air the room.
Clean the condenser.
Check that the fans are
Verify the proper insertion of the
54
Solutions
Contact the after-sales
service.
electrical power supply
core probe
core probe
Contact the after-sales
service.
working properly.
core probe
