Idiomas disponibles
Idiomas disponibles
Time Positive Blast Chilling Cycle
This cycle lowers the temperature at the core
of the product from + 90 ° C to + 3 ° C in the time
set by the user. We recommend performing some
test cycles to determine the needed time to
properly chill the product. We remind you that
acquired and eventually saved times are to be
considered valid for the exclusive use of the same
product type and at the same amount per cycle.
To switch to a timed cycle, press inside the blast
chilling screen, the area
down the temperature cycle area
illuminate the timed cycle area
Pressing the area
possible to change the operating cell temperature.
Pressing the area
possible to change the duration of the blast chilling
cycle.
Pressing the area
possible to change the fan speed during the blast
chilling.
Pressing the area
it is possible to change the
cell temperature
and the speed of the fans
during the conservation phase
Press the area
phase: the relative area will be enlightened
In this case the positive chilling cycle will be divided
into three stages :
•
Intensive blast chilling (HARD)
•
standard blast chilling
•
conservation
: the system will shut
and
.
it is
it is
it is
to enable the intensive
.
Pressing the
area, the controller displays the
"advanced setting" screen :
Within this mode, following values can be changed
:
•
during the intensive phase ;
•
intensive phase ;
•
during the conservation phase ;
•
phase ;
•
conservation.
To exit the "advanced settings" screen press
on the upper left display area.
To confirm the blast chilling cycle settings press the
right lower area
17
ENGLISH
cell temperature
duration of the
cell temperature
fan speed during the intensive
fan
speed
during
.
GB
the
