Idiomas disponibles
Idiomas disponibles
Temperature Frosting Cycle
This cycle lowers the temperature at the core
of the product from + 90 ° C to - 18 ° C in the
shortest time possible and within a maximum time
of 270 minutes. The end of the cycle is determined
by the achievement of the value - 18 ° C read by
the core probe.
Selecting the freezing cycle, the system displays
following screenshot :
By default the system suggests the temperature
cycle.
By pressing the area
possible to change the operating cell temperature.
By pressing the area
possible to change the product temperature at the
end of the cycle.
By pressing the area
possible to change the fan speed during frosting.
Pressing the area
it is possible to change the
cell temperature
and the speed of the fans
during the conservation phase.
Press the area
to enable the SOFT phase:
the relative area will be enlightened
In this case the frosting cycle will be divided into
three stages :
•
SOFT frosting
•
standard frosting
•
conservation
Pressing the
"advanced setting" screen :
Within this mode, following values can be changed
:
•
during the SOFT phase ;
•
temperature at the end of the SOFT cycle;
•
during the conservation phase ;
it is
•
phase ;
it is
•
conservation.
it is
To exit the "advanced settings" screen press
on the upper left display area.
To confirm the frosting cycle settings press the right
lower area
.
19
ENGLISH
area, the controller displays the
cell temperature
product
cell temperature
fan speed during the SOFT
fan
speed
during
.
GB
the
