Idiomas disponibles
Idiomas disponibles
Preparing the torque and angle wrench
Selecting inserts and plug-in tools
WARNING
Risk of injury due to an incorrectly set
extension length.
Make sure that the extension length
appropriate to the plug-in tool is set
on the torque and angle wrench.
CAUTION
Risk of injury due to unsuitable inserts
and plug-in tools.
Use only inserts or plug-in tools
whose form and design are suitable
for the intended use.
Plug-in tools from STAHLWILLE guarantee the
correct lever length, offer the necessary
dimensional accuracy in all connection areas
and provide the required material strength.
CAUTION
Risk of injury due to exceeding the
maximum load-bearing capability of
the inserts and plug-in tools.
Make sure that you do not exceed
the maximum load-bearing capability
of the inserts and plug-in tools.
The maximum load-bearing capability of the inserts
and plug-in tools may be lower than the maximum
permissible torque of the torque and angle wrench.
24
CAUTION
Risk of injury due to incorrectly
mounted plug-in tools.
Make sure that the plug-in tools are
secured against pulling out by
engaging the retaining pin.
CAUTION
Risk of injury due to internally
manufactured special tools.
Only manufacture special tools in
consultation with STAHLWILLE.
CAUTION
Risk of injury due to unsuitable plug-in
tools.
Only use the plug-in tools
recommended in the STAHLWILLE
catalogue.
ATTENTION
Damage to the measuring elements of
the torque and angle wrench possible.
Protect the torque and angle wrench
e.g. against hard jolts or dropping.
Make sure of the following when using inserts with a
square drive on the torque and angle wrench:
The correct shape and size for the exchange
system on the torque and angle wrench
The correct shape and size of the inserts for
connection to the threaded connection to be
tightened
