Stahlwille MANOSKOP 714 Manual De Instrucciones página 73

Description
The torque and angle wrench is switched on and in
a menu
Button Function
MENU Move upwards,
increase values
HOME Cancel process,
back step by step in the menu,
switch off
TARE Move downwards,
reduce values
OK Confirm
Elements on the display
During the tightening procedure, the current torque
or the angle is shown on the display. The displays
are dependent on the set measuring mode.
Information on the current settings is additionally
displayed.
No. Explanation
1 Set torque or
name of the sequence plan
2 Set angle
(not in "torque" measuring mode)
3 Set function mode
Click (C)
Peak (P)
Track (T)
4 Currently present torque (in "angle-torque"
measuring mode, the currently present
angle is displayed here)
5 Currently present angle
(not available in "torque" measuring mode)
(In "angle-torque" measuring mode, the
currently present torque is displayed here)
6 Malfunction/message symbol
(When processing a sequence plan, the
number of threaded connections already
completed and the total number of threaded
connections to be carried out are displayed
here, e.g. 2/5)
7 Function-specific symbols (see following
table)
8 Battery status indicator (only visible on
switching on or if the battery status is
insufficient)
13