Stahlwille MANOSKOP 714 Manual De Instrucciones página 68

Safety
Avoiding malfunctions
 Check the device's accuracy at regular intervals,
see page 58.
 Do not overload the torque and angle wrench.
Excessive or permanent overloading may lead to
torque and angle wrench measuring errors.
 Never exceed the maximum limit torque of 125 %
of the nominal value.
 Do not kink the cables and connectors, and never
expose these to excessive tensile forces or
temperatures.
 Make sure that all plug-in tools and connectors
which are used are firmly connected and correctly
inserted.
 Make sure that the correct extension length is set.
Environmental pollution due to incorrect disposal
 Dispose of cleaning agents and lubricants
according to the regulations applicable at the
operating location.
 Dispose of the torque and angle wrench
according to the regulations applicable at the
operating location.
8
Handling rechargeable batteries and
batteries
 Rechargeable batteries and batteries may contain
poisonous substances which pollute the
environment.
 Rechargeable batteries and batteries must be
kept out of the reach of children. Children may put
these into their mouths and swallow them.
 Leaking batteries and rechargeable batteries may
cause damage to the torque and angle wrench. If
the torque and angle wrench is not used for a long
time, remove the batteries. If a battery has leaked,
put on protective gloves and clean the battery
compartment with a dry cloth.
 Replace weakening rechargeable batteries and
batteries in good time.
 Always replace all rechargeable batteries and
batteries at the same time. Only use rechargeable
batteries and batteries of the same type.
 Only use suitable charging facilities to charge the
rechargeable batteries.
 Do not charge batteries.
 Always dispose of rechargeable batteries and
batteries according to the applicable legal
regulations.