Stahlwille MANOSKOP 714 Manual De Instrucciones página 72

Description
Battery arrangement
This symbol specifies the
number, the type, the polarity
and the maximum voltage of the
rechargeable batteries or
batteries to be used.
USB interface
This symbol identifies the
presence of a USB interface.
Protection type
IP20 Protection type of the torque and
angle wrench according to
DIN 60529
Display and buttons
No. Explanation
1 Display
2 TARE (taring)
Down arrow button (selection)
3 OK button (confirmation)
4 MENU (call up menu)
Up arrow button (selection)
12
No. Explanation
5 HOME (back one menu level)
Switch off (keep the button
pressed until the device switches
off)
The four buttons on the torque and angle wrench
can be used to select functions and undertake
settings.
Depending on the operating status of the torque
and angle wrench, the buttons perform different
tasks.
The following tables provide an overview:
The torque and angle wrench is switched off
Each button Switch on
The torque and angle wrench is switched on and
not in a menu
Button Function
MENU Call up main menu
HOME Switch off
TARE Manual taring
OK Call up configuration menu or call
up the last torque-angle value