Stahlwille MANOSKOP 714 Manual De Instrucciones página 99

Basic menu operation
Calling up the configuration menu
The basic settings for the torque and angle wrench,
such as e.g. saving the data for the completed
bolting operations in the torque and angle wrench,
are defined in the configuration menu.
Proceed as follows to select the configuration
menu:
 Press the OK button for approx. one second.
The CONFIG & DATA menu is displayed
 Use the arrow buttons to select
CONFIGURATION.
 Confirm with OK.
If the configuration menu is protected by an
administrator password, the administrator password
must now be input. The administrator password
consists of a four-digit numerical code.
 Set the first number using the arrow buttons.
 Confirm with OK.
 Set the other numbers in the same manner.
After inputting the correct number, the
CONFIGURATION menu is displayed.
 Use the arrow buttons to select the desired menu
item.
 Carry out the desired settings.
The settings in the configuration menu can be
carried out on the PC independently of the
torque and angle wrench using the
SENSOMASTER software. An administrator
password may also be assigned here to protect
against unauthorised access to the torque and
angle wrench configuration. Information on this
can be found in the SENSOMASTER software
online help.
39