Fagor PS-50/200 TP2 Manual De Instrucciones página 30

3.3.3. Cooling phase
By pressing STOP, the programme switches to the cooling phase (if the cylinder temperature
is above 80°C) and the machine will stop automatically when the temperature has reached
80°C.
It is possible to restart any programme at any time during the cooling phase.
During the cooling phase, it is possible to access the main menu (access to programme
management, maintenance, configuration and statistics menus). See section 3.4.
3.3.4. Accessing a menu when a programme is running
To access the menu when a programme is running, press the upper right-hand corner of the
running screen to go to the screen below.
6
1. Return to the running screen
2. Access to the output menu to view output statuses (activated or not activated) -
Reserved for technicians
3. Access to the input menu to view the input statuses - Reserved for technicians
4. Save the current program: Used to save any changes (temperature, speed ...)
made to the current programme or to save the changes under another existing
programme name or to save them in a new programme (creation) with a new name.
5. Temporary statistics: Used to reset temporary statistics(Total laundry item
production and hourly production) during the current program.
6. Return to the running screen
7. Adjustment of the 1
machine option is activated) - See section 3.7
8. Manual start of the conveyor (only available if the folding machine option is
activated) - See section 3.7
Screen in the cooling phase
5
st
fold widths for long lengths (only available if the folding
4
1
2
3
7
8
26