Idiomas disponibles
Idiomas disponibles
Do not stop the machine by pressing the emergency stop, which should only be used in case
of extreme necessity.
Specificities of steam-heated machines:
For steam-heated machines, the temperature is not adjustable and depends on the steam
input pressure (which should ideally be 10 BAR).
At start-up, open the steam cut-off valve very gradually over about ten minutes in 3 or 4 steps
to soften the entry of steam into the cylinder and protect the rotary steam box. At the end of
production, close the steam input valve.
The steam output cut-off valves must remain open at all times.
Press STOP and the machine will stop automatically when the temperature has reached 80°C
(default value).
3.2.
Interface
3.2.1.
OFF Screen
The machine is fitted with a touch screen to display all information and on which all the controls
displayed on the screen can be selected (programme selection, menu, programme start and
stop, ...).
1
2
4
1.
Machine identification: Machine identification label (if activated).
2.
Laundry message: Message configured by the user (if activated).
3.
Logo: The logo is displayed (if activated).
4.
Time: hours and minutes in the selected format.
5.
Date: Date in the selected format (if activated).
If the "energy saving" option is active (configuration menu and enabled at the origin), and if
there is no action on the screen (machine stopped) for 10 minutes, the screen back-lighting
will switch off. If any part of the screen is touched, the back-lighting will come back on.
By pressing the OFF screen, the "main" screen is displayed.
3
5
22
