Presser Foot Lifter; Drop Feed Lever; Marks On The Needle Plate - Texi Black&White Manual De Usuario

PRESSER FOOT LIFTER

There are three positions for your presser foot:
1. Lower the presser foot to sew.
2. Raise the lifter to the middle position to insert
or remove fabric.
3.
Lift it to its highest position to change the
presser foot or to remove thick fabric.

DROP FEED LEVER

The fabric feed dogs project up through
the needle plate, directly below the
presser foot. The function is to move
the fabric being sewn. The drop feed
lever controls the fabric feed dogs. For
ordinary sewing, move the lever to the
left (from the front of the machine) This
raises feed dogs to their highest position.
For most sewing, the lever should be in
this position. For darning of free motion
embroidery or whenever fabric is to be
moved by hand, move the lever to the
right to lower the fabric feed dogs.

MARKS ON THE NEEDLE PLATE

Lines on the stitch plate help to guide
material evenly. The numbers on the needle
plate indicate the distance between the
center needle position and the indicating
line. The numbers in the front indicate
in Millimeters. The numbers in the back
indicate in inches.
Texi Black&White INSTRUKCJA 2018.indb 85
Texi Black&White
EN
85
11.04.2018 16:27