Start And End Of Seam; Turning Corners - Texi Black&White Manual De Usuario

EN

START AND END OF SEAM

CAUTION: While sewing, spacial care is
required around the needle area. As the
machine automatically feeds the fabric,
do not pull nor push fabric.
1.
Move needle to its highest position
by using position needle button
2. Place the fabric under the presser
foot.
3. Lower the presser foot.
4. Hold back threads when starting
machine. Let threads go after sewing
a few stitches.
5. Regulate the speed while sewing.
6. Stop machine when you reach end of seam.
7. Raise the presser foot lifter.
8. When you have reached the end of a seam, stop sewing and turn the hand
wheel toward you to bring the needle to it's highest position. Raise the presser
foot and pull the fabric out from under the foot to the back of the machine.
Cut the threads on the thread cutter.

TURNING CORNERS

1.
Stop the machine when you reach a corner
2.
Lower needle into the fabric
3. Raise the presser foot.
4. Use the needle as a pivot and turn fabric.
5. Lower the presser foot and resume sewing.
98
Texi Black&White INSTRUKCJA 2018.indb 98
Needle posion button
Lower thread
Texi Black&White
Upper thread
11.04.2018 16:28