Inserting The Needle; Adjusting The Thread Tension - Texi Black&White Manual De Usuario

INSERTING THE NEEDLE

Select a needle of the right type and size for the
fabric to be sewn.
CAUTION: Turn off the power before removing
the needle.
1.
Turn the handwheel toward you until the
needle is at its highest point.
2. Loosen the needle clamp screw.
3. Remove the needle.
4. Insert new needle into needle clamp with flat
side to the back and push it up as far as it will
go.
5.
Tighten the needle clamp screw.
NOTE: Do not use bent or blunt needles. Place
needle on a flat surface and check to see if bent.

ADJUSTING THE THREAD TENSION

The thread tension must be properly balanced. If adjustment is required, it can be
made by changing the upper thread tension. Correct thread tension: upper and
bobbin threads should interlock in the middle of fabric.
Texi Black&White INSTRUKCJA 2018.indb 91
Texi Black&White
Flat side
Needle
Flat side toward the back
EN
91
11.04.2018 16:28