Texi Black&White Manual De Usuario página 113

Machine does not
feed at all
Machine does not
feed properly
Machine doesn't
work
Machine works
too laud or too
slow
LED lamp doesn't
work
Texi Black&White INSTRUKCJA 2018.indb 113
Lint or dust accumulated
around feed dog
Feed dog lever are lowered
Stitch length is too small
Stitch length is with value 0
Bobbin thread is about to end
Machines is not plugged
Main switch is in position „0"
Buttonhole lever is lowered
Buttonhole is raised during
buttonhole sewing
The thread tangled up in
bobbin
The thread tangled up in
bobbin
Dirt in the bobbin and hook
area blocked feed dog
Machine has no oil
Main switch is in position „0"
Lamp got burnt
Texi Black&White
Clean feed dog area
Check if feed dog lever is on
right position
Adjust stitch length
Adjust stitch length
Rewind thread on the bobbin
Insert plug fully into outlet
Turn on the switch to „1"
Raise buttonhole lever
Lower buttonhole lever
Reinsert bobbin and thread
Reinsert bobbin and thread
Clean feed dog
Oil the machine
Turn on the switch to „1"
Replace LED lamp for new one
EN
113
11.04.2018 16:28