Thread Stand; Winding The Bobbin - Texi Black&White Manual De Usuario

EN

THREAD STAND

HORIZONTAL SPOOL PIN for normal
thread spool
Place thread spool on the pin and secure
with a spool cap to ensure smooth flow
of thread. If the thread spool has a thread
retaining slit, it should be placed to the
right.
VERTICAL SPOOL PIN for large thread
spool
Attach the spool pin. Place a spool
of thread on the spool pin.

WINDING THE BOBBIN

1. Place a spool of thread on the spool pin, and secure
it with the spool pin cap. Pull the thread out from
the spool and place it through thread guides as
shown in illustration.
2. Put end of thread through the hole in bobbin as
shown.
3. Push bobbin winder shaft to far left position, if it is
not already there. Place bobbin onto shaft with end
of thread coming from top of bobbin. Push bobbin
winder shaft to the right until it clicks. Hold onto
end of thread. During winding needle bar won't
move, machine won't sew, only motor works.
4. Start machine. Bobbin will automatically stop turning when completely filled.
Push shaft to the left to remove bobbin and cut thread.
86
Texi Black&White INSTRUKCJA 2018.indb 86
Spool
Vertical
spool pin
Spool pin cap
Texi Black&White
Spool Spool pin
11.04.2018 16:28