Inserting The Bobbin - Texi Black&White Manual De Usuario

INSERTING THE BOBBIN

1. Raise the needle to its highest position by rotating the hand wheel toward you.
2. Remove the bobbin cover plate by pushing the release button to the right. Bobbin
cover will pop up sufficiently to allow you to remove the cover.
3.
Place bobbin into bobbin holder with the thread unwinding counter clockwise.
Warning: incorrect placing of bobbin can cause problems with sewing.
4.
Draw thread into notch (A).
5. With a finger held gently on top of the bobbin, pull the thread until it stops in
slot (B). Then pull about 10 cm of thread and lead it towards back of the machine
under the presser foot.
6.
Mount the bobbin cover plate onto the needle plate.
Texi Black&White INSTRUKCJA 2018.indb 87
Texi Black&White
EN
87
11.04.2018 16:28