Foot Control; Converting To Free-Arm Machine; Presser Foot Lifter - Texi Joy 48 Manual De Operación

EN
WARNING: Do not unplug by pulling on the cord.
To unplug, grasp the plug, not the cord.

FOOT CONTROL

Sewing speed can be varied by the foot control.
The harder you press on the control, the faster the machine runs.

CONVERTING TO FREE-ARM MACHINE

Your machine can be used either as a flat-bed, or as a
free-arm model. With the extension table in position, it
provides a working surface as a standard flat-bed model.
Be removing the extension table (just pull it off to the left
as shown), the machine converts into a free-arm model.

PRESSER FOOT LIFTER

There are three positions for your presser foot:
1. Lower the presser foot to sew.
2. Raise the lifter to the middle position to insert or remove fabric.
3.
Lift it to its highest position to change the presser foot or to remove
thick fabric.
64
position 0 - machine
Texi Joy 48
OFF
position I - machine ON
2
1
3