Presser Foot Lifter Lever; How To Adjust The Presser Foot Pressure; Replacing Presser Foot - Texi Integra 5 Manual Del Usuario

EN

PRESSER FOOT LIFTER LEVER

Presser foot lift lever can be used to raise
or lower the height of presser foot. When
the height is adjusted to a maximum of 6
mm, you can sew very thick fabric.

HOW TO ADJUST THE PRESSER FOOT PRESSURE

REPLACING PRESSER FOOT

NOTE: TURN OFF THE POWER.
1. Turn the hand wheel toward you to raise
the needle to its highest position. Raise the
presser foot.
2.
Press the lever on the back of the presser foot
holder. The presser foot will drop off.
3. Place the presser foot so the pin on the foot
lies just under the groove of the holder.
100
Once the stitch is formed, if you want to
continue sewing, do not have to raise the
presser foot lift lever. Use your fingers to
gently lift the presser foot and push the fabric
under the raised presser foot. step pedal
speed controller, fabric will be sewing.
The pressure of the machine is readjusted for sewing medium
weight fabrics. It may be necessary to adjust the pressure to sew
different weights of fabrics by turning the pressure regulationg
screw (use screwdriver S). For light weight fabric - decrease
pressure. For heavy weight fabric - increase pressure.
Texi Integra 5