Software Error - Air Techniques ScanX Intraoral View Instrucciones De Uso

Error
X-ray image split vertically
into two halves
X-ray image with small bright
spots or clouding
Lamination of the PSP
detaches at the edge
14.2

Software error

Error
"Too much ambient light"
"Overtemperature"
"Erasure unit fault"
2151100018L40 2012V016
Possible cause
Dirt in the laser slit (e.g. hair,
dust)
Micro scratches on the PSP
Wrong retainer system used
PSP handled incorrectly.
Possible cause
Unit is exposed to too much
light
Laser or erasure unit too hot
LED defective
Troubleshooting
Remedy
❯ Clean the laser slit.
❯ Replace the PSP.
❯ Only use original PSP and film
retainer systems.
❯ Use the PSP correctly.
❯ Comply with the operating
instructions of the PSP and
film retainer systems.
Remedy
❯ Darken the room.
❯ Turn the unit such that no light
can directly enter into the
entry slot.
❯ Switch the unit off and allow it
to cool.
❯ Contact technician.
EN-
US
53