Tabla de contenido
Idiomas disponibles
Idiomas disponibles
6. Maintenance
NOTE!
To ensure uniformity, the sharpening
stone should remain spinning during
sharpening. If this is not happening,
you should manually push it as follows:
Turn off the power take off.
1.
Move the sharpening stone away from the
2.
knives.
With your hand, turn the stone counterclockwise
3.
(facing the sharpener).
Turn the machine on and restart sharpening.
4.
If the knives are very worn, not
allowing adjustment with the counter
knife, replace all (the complete kit).
A replacement of only one knife will
cause unbalance of the rotor. When
it is too worn, the sharpening stone
will not touch the knives, making it
impossible to sharpen. In this case, it
must be replaced by a new one.
Once the knives have been sharpened,
the counter knife must be adjusted as
described in item 6.10.
The presence of people or animals near
the outlet chute during sharpening
procedure is prohibited. During the
procedure, sparks may be released from
the outlet chute and, if they strike people
and animals, they may cause injury to the
skin and eyes.
• Do not try to sharpen the knives with
the machine cover open.
• Wear goggles when sharpening.
72
CAUTION!
Instructions Manual
Capítulos
Tabla de contenido
