Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
GB
CUTTING DECKS
Construction
Deck Drive
Spindles
Blades
Center Deck
9'8" Model Wing Decks
10'7" Model Wing Decks
Caster Wheels
Center Deck
Wing Decks (European)
Wing Decks (U.S.)
Weight Transfer
Antiscalp Rollers
Lift
Center Deck
Wing Deck
Dimensions
Center Deck Width
9'8" Wing Deck Width
10'7" Wing Deck Width
Weights
Center Deck
9'8" Wing Deck
10'7" Wing Deck
CUTTING PERFORMANCE
Rate
9'8" Model
10'7" Model
Height of Cut
ACCESSORIES
2-post ROPS cab
Headlights
Turn signals and 4-way flashers (European only)
VIBRATION LEVEL
The machine was tested for whole body and hand/arm vibration levels. The operator was seated in
the normal operating postion with both hands on the steering mechanism. The engine was running
and the cutting device was rotating with the machine stationary.
With cutter deck width 324cm (10' 7")
Hand / Arm acceleration level : 0.61 m/s
Whole body acceleration level
X axis
Y axis
Z axis
Heavy-duty, welded 10-gauge steel with 7-gauge skirts
Single L-L poly section belt
1.25" (4 cm) diameter, double sealed bearings
Three, 21" (53 cm), 0.25" (6 mm) thick, heat treated blades
Two each, 18" (46 cm), 0.25" (6 mm) thick, heat treated blades
Two each, 21" (53 cm), 0.25" (6 mm) thick, heat treated blades
Two, 11 x 4.00 pneumatic, tubeless, 4-ply
Two, 9 x 3.50 pneumatic, tubeless, 4-ply
Two, 9 x 3.50 pneumatic, tubeless, 4-ply
Transfers 200 lb (91 kg) hydraulically from mowing decks to tractor
for better traction
Center Deck: Three front, Two rear
Hydraulic lift to 6" (16 cm)
Hydraulic lift to vertical position
60" (153 cm)
35" (89 cm) each
40.5" (103 cm) each
330 lb (150 kg)
220 lb (100 kg) each
245 lb (111 kg) each
5.8 acres/hr @ 5 mph (2.35 ha/hr @ 8 km/h)
6.4 acres/hr @ 5 mph (2.6 ha/hr @ 8 km/h)
1" to 4.75" (3 cm to 13 cm) in 0.25" increments
2
2
: 0.12 m/s
2
: 0.24 m/s
2
: 0.36 m/s
SAFETY & OPERATION MANUAL
with cutter deck width 295cm (9' 8")
Hand / Arm acceleration level : 0.61 m/s
Whole body acceleration level
X axis
Y axis
Z axis
JACOBSEN HR9510
2
2
: 0.12 m/s
2
: 0.24 m/s
2
: 0.36 m/s
GB-41
Capítulos
Tabla de contenido
