Jacobsen CV Serie Manual De Seguridad Y Operacion página 11

LABELS
GB
WARNING
Read, study and understand all warning labels and
operating instructions.
Never allow unskilled or improperly trained personnel
to operate this equipment.
Before cleaning blockages, servicing or making
adjustment -
disengage PTO
turn engine off
set parking brake
remove key
wait until all parts have stopped rotating.
Keep all labels legible and intact.
Failure to follow these warnings may result in
equipment and/or property damage.and/or personal
or fatal injury.
WARNING
Remove debris build-up. Debris under belt cover or
near muffler can cause fires.
Blades continue to rotate for a few seconds after
blades are turned off.
Blades must be at least 1/8" above bottom of
housing.
All blades must be identical. Check blade bolts
daily for tightness.
Inspect for damage after striking a foreign object.
Make repairs before restarting operation.
Find and repair cause of any abnormal vibration.
SAFETY & OPERATION MANUAL
NOTICE
Keep air intake
screens free from
debris.
WARNING
Read and understand the operator's manual.
Replace if lost or damaged.
When operating on slopes:
- Keep decks lowered. Do not stop suddenly.
- Operate at slow speeds and avoid sharp turns.
- The ultimate responsibility lies with the operator;
if operator feels uncomfortable about operation,
cease operation.
Operate up and down slope, NOT across.
When leaving operator's position:
- Shut off PTO
- Shut off engine
- Set parking brake
- Remove key
Do not carry passengers
Stop engine before servicing or refuelling.
Keep labels, guards and shields in place.
Replace if damaged.
Keep all safety interlock devices in working condi-
tion.
Do not allow children, unskilled or improperly trained
personnel to operate.
Obey safety instructions. Failure to do so may
cause injury to you or others and cause equipment
damage.
See operator's manual for proper cutter deck
servicing procedure.
JACOBSEN HR9510
GB-9