Step Cutting - Jacobsen R-311 Manual De Seguridad

5 QUALITY OF CUT
5.3

STEP CUTTING ___________________________________________________________

NOTE: Arrow indicates direction of travel.
Probable Cause
HOC (height-of-cut) settings are different from one side of a
deck to the other or from one deck to another.
Worn deck caster wheel bearings or fork bushings.
Tire pressure uneven.
22
Step cutting occurs when grass is cut taller on one side of
a deck than the other. This is usually caused by
mechanical wear or deck caster adjustment.
TN0221
Check HOC adjustment of decks. (Refer to Parts & Maintenance
Manual.)
Check/replace deck caster wheel bearings and fork bushings.
Check/adjust proper tire inflation pressure. (Refer to Parts &
Maintenance Manual.)
Remedy