Jacobsen CV Serie Manual De Seguridad Y Operacion página 38

SERVICE
GB
CUTTER DECK BELT TENSION
Check all belts regularly during the first 5, 10 and 15 hours of operation, and then after every 50 hours of
operation. If necessary adjust as follows:
CENTER DECK
1. Adjust belt tension to 1/2" (13 mm) deflection
at 10 lbs (5 kg) force at the middle of the long
rear span D. If necessary, adjust as follows:
2. Loosen locking nut on adjustment bolt E.
3. Loosen (4) bolts G fastening the motor mount-
ing plate to the cutter deck (3 visible in photo).
4. Turn adjustment bolt E until proper tension is
obtained.
5. Retighten (4) bolts G and lock nut on adjust-
ment bolt E.
WING DECK
1. Adjust belt tension to 3/8" (10 mm) deflection
at 10 lbs (5 kg) force at the middle of the long
rear span H. If necessary, adjust as follows:
2. Loosen locking nut on adjustment bolt L.
3. Loosen two bolts I fastening the idler plate to
the cutter deck.
4. Turn adjustment bolt L until proper tension is
obtained.
5. Retighten bolts I and lock nut on adjustment
bolt L.
GB-36
JACOBSEN HR9510
SAFETY & OPERATION MANUAL