Jacobsen CV Serie Manual De Seguridad Y Operacion página 22

CONTROLS
GB
IMPLEMENT LIFT CONTROL (L)
(3) levers control lifting of each of the (3) cutter
decks. The left hand lever controls the left hand
cutter deck, etc. To raise a cutter deck, pull back
on the lever and hold until deck is raised. To lower,
push lever forward and hold until deck is lowered.
Levers will automatically return to neutral position
when released.
WING DECK LATCHES (W)
Pull latch towards seat to unlatch the cutter deck
and use proper implement lift lever to lower the
deck. Decks should be in the raised position and
latched when machine is not cutting grass and
being driven or transported.
PUSHING THE MACHINE WITH THE ENGINE
STOPPED
This machine can be pushed or towed with the
engine stopped. This can be accomplished as
follows:
a) Unscrew the cap U from the Free Wheel Valve
V.
b) Insert an allen wrench into the top of the
exposed needle valve and rotate counterclock-
wise completely.
c) The machine can now be pushed or towed.
IMPORTANT - Do not tow machine more than one
mile at 1 mph.
GB-20
JACOBSEN HR9510
SAFETY & OPERATION MANUAL