Safety Signs; Starting The Engine; Driving The Machine - Jacobsen CV Serie Manual De Seguridad Y Operacion

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

SAFETY
GB
This safety symbol indicates important safety
messages in this manual. When you see this
symbol, be alert to the possibility of injury,
carefully read the message that follows, and inform
other operators.
OPERATING INSTRUCTIONS
Ensure that the instructions in this book are
read and fully understood.
No person should be allowed to operate this
machine unless they are fully acquainted
with all the controls and the safety proce
dures.
Never allow children or people unfamiliar with
these instructions to use this machine. Local
regulations may restrict the age of the
operator.

SAFETY SIGNS

It is essential all safety labels are kept
legible, if they are missing or illegible they
must be replaced. If any part of the machine
is replaced and it originally carried a safety
label, a new label must be affixed to the
replacement part. New safety labels are
btainable from Ransomes dealers.

STARTING THE ENGINE

Before starting the engine check that the
brakes are applied, drives are in neutral,
guards are in position and intact, and by
standers are clear of the machine.
Do not run the engine in a building without
adequate ventilation.

DRIVING THE MACHINE

Before moving the machine, check to ensure
that all parts are in good working order,
paying particular attention to brakes, tyres,
steering and the security of cutting blades.
Replace faulty silencers, mow only in
daylight or good artificial light
Always observe the Highway Code both on
and off the roads. Keep alert and aware at all
times. Watch out for traffic when crossing or
near roadways.
Stop the blades rotating before crossing
surfaces other than grass.
SAFETY & OPERATION MANUAL
Remember that some people are deaf or
blind and that children and animals can be
unpredictable.
Keep travelling speeds low enough for an
emergency stop to be effective and safe at
all times, in any conditions.
Remove or avoid obstructions in the area to
be cut, thus reducing the possibility of injury
to yourself and/or bystanders.
When reversing, take special care to ensure
that the area behind is clear of obstructions
and/or bystanders. DO NOT carry passen
gers.
Keep in mind that the operator or user is r
esponsible for accidents or hazards occur
ring to other people or their property.
When the machine is to be parked, stored
or left unattended, lower the cutting means
unless the transport locks are being used.
While mowing, always wear substantial
footwear and long trousers. Do not operate
the equipment when barefoot or wearing
open sandals.
Check the grass catcher frequently for wear
or deterioration. After striking a foreign
object. Inspect. the lawnmower for damage
and make repairs before restarting and
operating the equipment.
If the machine starts to vibrate abnormally,
check immediately.
TRANSPORTING
Ensure that the cutting units are securely
fastened in the transport position. Do not
transport with cutting mechanism rotating.
Drive the machine with due consideration of
road and surface conditions, inclines and
local undulations.
Sudden decelerating or braking can cause
the rear wheels to lift.
Remember that the stability of the rear of
the machine is reduced as the fuel is used.
JACOBSEN HR9510
GB-3

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Hr9510

Tabla de contenido