Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SERVICE
GB
BLADE SHARPENING & REMOVAL
When required, the cutter blades may be sharp-
ened either by filing or grinding. It is essential that
the balance of the blades are maintained.
NOTE: Always replace blades with original Ran-
somes blades, do not use another manufacturers
blades.
–
Service the blades with the tractor turned off,
and the decks securely supported.
–
Do not overheat or weaken the blades.
–
If blade becomes cracked or bent, replace with
a new blade to ensure safe operation
–
f lift portion of blade is worn thin replace with a
new blade to ensure safe operation
–
Place block of wood W between blade and
deck baffle to prevent blade from turning during
removal
–
Keep hands clear of rotating blades
Removing Blades
1. Remove the nut N from the top of the blade
spindle bolt
2. Remove the blade spindle bolt with the washer
and blade.
3. Replace the blade, washer and blade spindle
bolt.
4. Tighten to 100-140 ft-lbs (135-190 N-M)
FUSES
Blade-type fuses in fuse holder F are used to
protect circuits.
JACOBSEN HR9510
SAFETY & OPERATION MANUAL
GB-37
Capítulos
Tabla de contenido
