Illustrated Controls; Manual Control Description - Nogueira VMN 4.0 Manual De Instrucciones

Illustrated Controls

3 Standard Manual Operations (version w.o./ milling machine)
NOTE: The following layout of the CONTROLS is not always the same.
The layout can vary according to the requested type of control layout.

Manual Control Description

3) Label Code 05.200291
- This controls the speed of the milling machine rotation.
05.200291
4) Optional Control
- Discharge towards the right - Raising and lowering the conveyor: 3-position lever: raise/ stop/
Lower. For safety reasons, and for good operations of the machine, after each operation, put the
lever back in the STOP position before actuating any other.
Mixers Wagons VMN 4.0 / 6.0 / 8.0
1) Label Code 05.200288
- This opens and closes the discharge door: 3-position lever: opened/
stop/ closed.
- Conveyor rotation: 2-position lever: stop/ conveyor rotation.
For safety reasons, and for good operation of the machine, after each
operation, put the lever back in the STOP position before actuating any
other.
05.200288
2) Label Code 05.200289
- Raising and lowering the milling machine arm, there are
three positions in this lever.
- Raise and lower the rear blade of the mixer, 2-position
lever.
- Rotation direction of the milling machine, 2-position
05.200289
lever.
19