Tabla de contenido
ELECTRICAL
STARTER SOLENOID
$% 86.60.08
Remove
1. Disconnect battery earth lead.
1. Disconnect battery earth lead.
2. Remove starter motor.
2. Remove starter motor.
+
STARTER MOTOR, page 86-23.
3. Remove nut from solenoid and disconnect lead.
3. Remove nut from solenoid and disconnect lead.
4. Remove 2 bolts securing solenoid to starter motor
4. Remove 2 bolts securing solenoid to starter motor
housing.
5. Remove solenoid from starter motor housing.
5. Remove solenoid from starter motor housing.
6. Remove plunger from starter.
6. Remove plunger from starter.
Refit
1. Apply grease to lever end of plunger.
1. Apply grease to lever end of plunger.
2. Fit starter solenoid to starter motor housing and
2. Fit starter solenoid to starter motor housing and
tighten bolts.
3. Fit lead to rear of solenoid and tighten nut.
3. Fit lead to rear of solenoid and tighten nut.
4. Fit starter motor.
4. Fit starter motor.
+
STARTER MOTOR, page 86-23.
5. Connect battery earth lead.
5. Connect battery earth lead.
86-24
REPAIRS
PANEL DIMMER RESISTOR
$% 86.65.37
Remove
1. Release 2 clips and open fuse box cover.
1. Release 2 clips and open fuse box cover.
2. Release dimmer resistor from instrument cowl.
2. Release dimmer resistor from instrument cowl.
3. Disconnect multiplug from dimmer.
3. Disconnect multiplug from dimmer.
Refit
1. Connect multiplug and engage dimmer to cowl.
1. Connect multiplug and engage dimmer to cowl.
2. Position fuse box cover and secure with clips.
2. Position fuse box cover and secure with clips.
Tabla de contenido
