Tabla de contenido
ELECTRICAL
HEADLAMP ASSEMBLY
$% 86.40.49
Remove
1. Remove front bumper valance.
1. Remove front bumper valance.
+
BUMPER VALANCE - FRONT, page 76-2-9.
2. Remove 4 bolts securing headlamp assembly to front
2. Remove 4 bolts securing headlamp assembly to front
panel and release headlamp assembly.
3. Disconnect headlamp multiplug and remove
3. Disconnect headlamp multiplug and remove
headlamp assembly.
4. Remove both headlamp bulb covers.
4. Remove both headlamp bulb covers.
86-8
REPAIRS
5. Disconnect both headlamp bulb multiplugs.
5. Disconnect both headlamp bulb multiplugs.
6. Release bulb holders and remove both headlamp
6. Release bulb holders and remove both headlamp
bulbs.
7. Release and remove indicator bulb holder and bulb.
7. Release and remove indicator bulb holder and bulb.
Refit
1. Fit indicator bulb and bulb holder.
1. Fit indicator bulb and bulb holder.
2. Fit headlamp bulbs and secure bulb holders.
2. Fit headlamp bulbs and secure bulb holders.
3. Connect headlamp bulb multiplugs.
3. Connect headlamp bulb multiplugs.
4. Fit headlamp bulb covers.
4. Fit headlamp bulb covers.
5. Position headlamp assembly to front panel and
5. Position headlamp assembly to front panel and
connect headlamp multiplug.
6. Fit bolts securing headlamp to front panel and
6. Fit bolts securing headlamp to front panel and
tighten to 10 Nm.
7. Fit front bumper valance.
7. Fit front bumper valance.
+
BUMPER VALANCE - FRONT, page 76-2-9.
8. Check/adjust headlamp alignment.
8. Check/adjust headlamp alignment.
+
HEADLAMPS - PAIR - ALIGN BEAM, page 86-2.
Tabla de contenido
