Tabla de contenido
PDC SENSOR - SIDE
$% 86.54.14
Remove
1. Position vehicle on 2 post ramp.
1. Position vehicle on 2 post ramp.
SP860274
2. Working from behind rear bumper cover, release
2. Working from behind rear bumper cover, release
the multiplug connector block from 'U' clip.
SP860269
3. Carefully remove 'U' clip from sensor.
3. Carefully remove 'U' clip from sensor.
Note: RH vertical, LH horizontal.
4. Push the PDC sensor rearwards and withdraw from
4. Push the PDC sensor rearwards and withdraw from
bumper valance.
2
5. Disconnect multiplug and remove PDC sensor.
5. Disconnect multiplug and remove PDC sensor.
Refit
1
1. Connect PDC multiplug.
1. Connect PDC multiplug.
2. Fit PDC sensor to bumper valance.
2. Fit PDC sensor to bumper valance.
3. Secure PDC sensor with 'U' clip.
3. Secure PDC sensor with 'U' clip.
4. Secure PDC connector block to 'U' bracket.
4. Secure PDC connector block to 'U' bracket.
ELECTRICAL
SP860275
REPAIRS
86-19
Tabla de contenido
