Tabla de contenido
WIPERS & WASHERS
WIPER MOTOR
$% 84.15.12
Remove
1. Remove wiper motor and linkage assembly.
1. Remove wiper motor and linkage assembly.
+
WIPER MOTOR AND LINKAGE, page 84-3.
2. Release multiplug clip from linkage.
2. Release multiplug clip from linkage.
3. Remove nut securing crank to motor spindle and
3. Remove nut securing crank to motor spindle and
release crank.
4. Remove 3 bolts securing motor.
4. Remove 3 bolts securing motor.
5. Remove motor.
5. Remove motor.
Refit
1. Connect multiplug to harness.
1. Connect multiplug to harness.
2. Operate wipers to park motor.
2. Operate wipers to park motor.
3. Disconnect multiplug.
3. Disconnect multiplug.
4. Fit motor to linkage bracket and tighten bolts to 12
4. Fit motor to linkage bracket and tighten bolts to 12
Nm.
84-4
REPAIRS
5. Align crank between timing marks and fit to motor
5. Align crank between timing marks and fit to motor
spindle.
6. Fit and tighten crank nut to 18 Nm.
6. Fit and tighten crank nut to 18 Nm.
7. Engage multiplug.
7. Engage multiplug.
8. Fit wiper motor and linkage.
8. Fit wiper motor and linkage.
+
WIPER MOTOR AND LINKAGE, page 84-3.
Tabla de contenido
