Tabla de contenido
ELECTRICAL
7. Remove 3 Tx25 Torx screws securing latch assembly
7. Remove 3 Tx25 Torx screws securing latch assembly
to door.
8. Position latch assembly and disconnect 2 multiplugs.
8. Position latch assembly and disconnect 2 multiplugs.
9. Release cable from 2 inner door panel clips.
9. Release cable from 2 inner door panel clips.
10. Disconnect cable from remote door handle.
10. Disconnect cable from remote door handle.
11. Switch ignition ON and fully raise door glass.
11. Switch ignition ON and fully raise door glass.
12. Switch ignition OFF.
12. Switch ignition OFF.
86-6
REPAIRS
13. Remove latch assembly from door.
13. Remove latch assembly from door.
14. Remove sill button, lock link rod and cable from latch
14. Remove sill button, lock link rod and cable from latch
assembly.
Refit
1. Fit sill button, lock link rod and cable to latch
1. Fit sill button, lock link rod and cable to latch
assembly.
2. Position latch assembly to door and guide sill button
2. Position latch assembly to door and guide sill button
through door aperture.
3. Switch ignition ON and fully lower door glass.
3. Switch ignition ON and fully lower door glass.
4. Switch ignition OFF.
4. Switch ignition OFF.
5. Connect multiplugs to latch assembly.
5. Connect multiplugs to latch assembly.
6. Connect door release cable to remote door handle
6. Connect door release cable to remote door handle
and secure to inner door panel clips.
7. Align exterior handle, link rod to latch assembly and
7. Align exterior handle, link rod to latch assembly and
secure with clip.
NOTE: A small amount of free-play should be evident
between the exterior handle and latch. If necessary adjust the
exterior handle, link rod trunnion.
8. Engage lock link rod to lock.
8. Engage lock link rod to lock.
9. Fit Torx screws securing latch assembly to door and
9. Fit Torx screws securing latch assembly to door and
tighten to 5 Nm.
10. Secure plastic sheet to door.
10. Secure plastic sheet to door.
11. Fit door trim casing.
11. Fit door trim casing.
+
TRIM CASING, page 76-1-6.
Tabla de contenido
