Tabla de contenido
3. Fit sealing rubber to glass.
3. Fit sealing rubber to glass.
WARNING: Gloves and suitable eye protection must be
worn when fitting glass.
4. Insert a suitable length of cord in hard top aperture
4. Insert a suitable length of cord in hard top aperture
channel of sealing rubber.
5. Using assistance, push glass against hard top aperture
5. Using assistance, push glass against hard top aperture
whilst using cord to pull lip of seal over aperture flange.
6. Clean all traces of rubber lubricant from glass and
6. Clean all traces of rubber lubricant from glass and
hard top using white spirit.
7. Fit heated screen harness and connect Lucar
7. Fit heated screen harness and connect Lucar
terminals.
8. Fit hard top.
8. Fit hard top.
+
HARD TOP, page 76-3-7.
9. Press firmly around outside edges of glass to ensure
9. Press firmly around outside edges of glass to ensure
that seal is fully seated.
HOOD
76-3-19
REPAIRS
Tabla de contenido
