Coltene CanalPro CL Instrucciones Para El Uso página 46

„ Changing Batteries
Prepare small screwdrivers
1. Turn off the power of the motor handpiece.
2. Remove the rubber cover from the battery cover with
a thin flatblade screwdriver. (Fig. 13)
3. Remove the screw fixing the battery cover with a
screwdriver. (Fig. 14)
4. Remove the battery cover by sliding it toward the
charging terminal. (Fig. 15)
5. Remove old batteries.
6. Insert new batteries according to the polarity mark-
ing in the battery box. A mix-up between the plus
and minus sides will not allow operation of the hand-
piece.
7. Attach the battery cover.
8. Tighten the screw with a screwdriver. Do not over-
tighten it.
9. Insert the rubber cover back into the screw hole of
the battery cover in the originally inserted direction.
Changing of batteries is now completed. Charge them
fully before use.
CAUTION
- Do not misplace the rubber cover and screw.
- The used nickel metal hydride batteries are recyclable, but their disposal may sometimes not be permit-
ted by the respective country. Return them to your dealer.
46
Rubber Cover
Battery Cover
Screw
Battery Cover
Battery Cover
Fig. 13
Fig. 14
Fig. 15