Coltene CanalPro CL Instrucciones Para El Uso página 43

NOTICE
If this function is used, all programs will disappear and return to the originally set values.
Record the present program details if required before you carry out this operation.
(3) Calibration
This function is to decrease fluctuation in the rotation speed of the motor handpiece and the difference in
torque by the contra angle head.
1. Lubricate the contra angle head. (Refer to the "7 (1) Lubricating Contra Angle Head. " )
2. Turn on the power.
3. Hold down UP/DOWN key simultaneously for more than one second.
4. The LCD panel displays "
5. Attach the contra angle head to the motor handpiece and press the ON/OFF key. (Remove the bur or
TEST bur.)
6. If the motor handpiece begins to rotate, leave it as it is until it stops.
7. This process ends, if the rotation stops and the LCD panel display returns to its original state.
8. If you want to stop this process, turn off the power.
NOTICE
- This function does not work unless remaining battery capacity is sufficient.
- Perform calibration after cleaning the contra angle head. Residual contamination on the rotating shaft
will impair correct measurement.
- Do not touch or apply a load to the rotating shaft of the contra angle head. It will obstruct accurate
measurement.
- This function cannot completely absorb the individual difference of the actual motor handpiece and
contra angle head.
(4) Alarm Sound Volume Control
Setting alarm sound
You can turn ON/OFF the alarm (load alarm) which sounds near the torque limit value when the motor
handpiece rotates and the alarm during auto reverse (auto reverse sound).
1. Turn off the power
2. While pressing SELECT key, keep pressing POWER key one second or more.
3. The alarm mark and ON or OFF on the LCD panel, and the sound volume changes.
4. Press the SELECT key to select ON or OFF for alarm sound.
5. Display on the liquid crystal panel (LCD) returns to the original state if no operation is performed for a
while.
NOTICE
The volume setting is memorized automatically to the last setting and remains unchanged even if the pow-
er is turned off.
" with the alarm sound.
43