Alarm Trigger With Atas/Ataspro; Alarm Server Mode - Aastra 400 Serie Manual Del Sistema

Prestaciones
9. 10. 3. 4

Alarm trigger with ATAS/ATASpro

Alarm server mode

On the Office 160Safeguard/ATEX and the Aastra 630d a special
is available for the connection to an external alarm system. In this mode different
ATAS alarm messages are sent for each type of alarm trigger:
• Manual trigger with the SOS key
• Automatic trigger using man-down alarm:
• Automatic trigger using no-movement alarm:
• Combined automatic trigger using man-down and no-movement alarm
• Aastra 630d only: Automatic trigger using escape alarm:
This means the alarm server is able to respond differently to the alarms it receives,
depending on the type of trigger.
This functionality (as well as other features such as DECT locating) is available only
with the ATASpro protocol. The
also required.
The hotkey on the side of the phone can be freely configured with phone number
and/or functions and is completely independent of the other alarm triggering
functions. It can also be configured as
be stored on this key, which then generates other ATAS messages.
The following also applies for Aastra 630d:
• The alarm server is capable of alarming via the phone using 9 melodies. Of
these, one melody is
• The alarm server is capable of overriding the locally set alarm melodies. This also
applies to Vibra call
• The alarm server can use a special call alert to disconnect a call in progress and
raise the alarm using a rising default alarm tone.
• The alarm server can give the alarm a hidden function which is triggered when
the recipient of the alarm presses the Hook key (e. g. call to a number or setting
up a conference).
564
ATAS Interface
1 hotkey
Pager call and one
and Tone ringing suppressed.
Man-down alarm
No-movement alarm
Escape alarm
and ATASpro Interface
only. The Redkey function can also
Vibra call.
Funciones y prestaciones del sistema a partir de R2.1
Alarm server mode
licences are
syd-0370/1.2 – R2.1 – 07.2012