Redkey As Function Code; Hotkey Modes For Dect Cordless Phones; Hotkey Mode - Aastra 400 Serie Manual Del Sistema

Redkey as function code

To be able to perform the Redkey function also on third-party terminals (analogue
terminals, SIP terminals etc.), a */# function code is available. Possible applications
are analogue terminals in retirement homes, door intercom systems, lift telephones
etc.
Tab. 374 Trigger Redkey function: Function
Function
Trigger Redkey function

Hotkey modes for DECT cordless phones

On DECT cordless phones the Redkey function can be configured on the Hotkey. To
ensure that again only one keystroke is needed to trigger the function, the Hotkey
can be limited to one storage location (instead of 6) by using the parameter
1Hotkey only = Yes in the terminal settings. (A long click is required if the keypad
lock is activated.) This setting can be configured with AMS for each DECT cordless
phone.

Hotkey mode

On the Office 160Safeguard/ATEX and Aastra 630d the Redkey function is available
on the SOS key on the upper side of the phone. With the parameter
Yes the Redkey function is triggered with the automatic alarm triggers (Man-down,
no movement or escape alarm) as well as the SOS button and the hotkey. The follo-
wing two trigger types can be differentiated by configuring different parameters:
• Triggering by hotkey (on the side of the phone):
--> The parameter in the first number memory is added to the ATAS message.
• Manual trigger using the SOS key (on the upper side of the phone) or automati-
cally using the man-down, no-movement or escape alarm:
--> The parameter in the first number memory is added to the ATAS message.
Both trigger types are capable of triggering dialling or executing a function.
It is irrelevant whether a single, double or long click is carried out. (Exception: If the
keypad lock is activated, a long key is required for triggering using the hotkey.)
The accidental triggering of a function by the hotkey can be avoided by assigning
the number memories differently and their evaluation (e. g. on the ATAS server).
The configuration 1 hotkey only
hotkey in the usual way. In this case pressing the alarm button corresponds to pres-
sing the hotkey.
Funciones y prestaciones del sistema a partir de R2.1
syd-0370/1.2 – R2.1 – 07.2012
Function code
*73 <Parameter> #
= No provides six function or number keys on the
Prestaciones
Note
The parameter can contain a maxi-
mum of 28 digits.
1 Hotkey only =
563