End-Of-Selection Signal; Detailed Description - Aastra 400 Serie Manual Del Sistema

Tip:
An external directory can also be connected to the communication sys-
tem via OIP. To browse the directory, you need to initiate dialling by name
with the 0 key or the *-key.
9. 6. 3

End-of-selection signal

The input of an external number can be completed with the character #. The com-
munication server (or network system) interprets this as the end of selection and
immediately switches through.

Detailed Description

Dialling with end-of-selection signal is important in several cases:
• when dialling an external number in an open numbering plan
• when the LCR (Least Cost Routing) function is activated: In this case the commu-
nication server has to wait until the user has entered all the digits before it can
forward the complete number to the network provider configured. The end-of-
selection signal does not require any additional waiting time
• With SIP terminals on a communication server and a communication server con-
nected via an SIP provider to the public network. Without end-of-selection the
waiting time is 4 seconds.
Red
Sistema
de red
Fig. 203 Dialling with end-of-selection signal
Funciones y prestaciones del sistema a partir de R2.1
syd-0370/1.2 – R2.1 – 07.2012
#
Servidor
de
comuni-
caciones
Prestaciones
(Fig. 203).
(Fig. 204).
0-......#
441