Prestaciones
• Digit 1: One-way call connection (modus 1)
• Digit 2: Two-way call connection (modus 2)
• Digit 5: Cancelling the time limit on the call connection.
The mode switchover and time limit cancellation apply to this connection only.
Thereafter both the mode of the originally selected function and the time limits are
reactivated.
Actively terminating the call connection
Besides automatically terminating the call after 1 minute, both the destination
user and the user at the monitoring phone can prematurely terminate the call con-
nection. In all cases the room monitoring microphone is reactivated after a delay of
1 minute.
Calls during active room monitoring
If an internal or external user calls the monitoring phone, the handset signals the
call
only
visually, not acoustically. The call can be answered on the monitoring
phone in the usual way. The monitoring phone can also be used to make an outgo-
ing call. Once the call has been cleared down, the monitoring phone switches back
to monitoring mode without delay.
If the destination user calls the monitoring phone, the phone temporarily switches
to passive room monitoring (see next chapter).
Tips:
– Room monitoring is inactive while the monitoring phone is ringing.
This gap in monitoring can be prevented by activating call forwarding
on the monitoring phone. The destination user can still make a verifi-
cation call as call forwarding does not apply to him.
– In each case the room monitoring microphone is reactivated after the
delay times. This is indicated by the flashing exclamation mark on the
display of the monitoring phone.
Notes:
– Room monitoring based on DECT technology cannot be 100% reliable.
– Extraneous noises in the monitored room call lead to false calls.
– Therefore no liability can be assumed for failed monitoring calls or for
false calls.
494
Funciones y prestaciones del sistema a partir de R2.1
syd-0370/1.2 – R2.1 – 07.2012