Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operating sequence on the operator console:
• Press function key (*32 configured)
• Suffix dial 29 or wait 2 seconds
• Press the End key
As a call is signalled, the user in the phone box picks up the receiver, obtains a dial
tone and dials.
When the call in the phone box is completed the charge recall signal rings on the
operator console and the call charge information is displayed in the same way as in
variant 1 or 2 (possibly with a delay depending on the configuration).
9. 9. 6. 7
Property Management Systems (PMS)
The Ethernet interface (Port 1051) can be used to connect a PC to carry out func-
tions in the communication server using command language. A special command
set is available for communicating with the Property Management System. These
commands can then be used to carry out user-specific polling operations (e.g.
room status) and configurations (e.g. wake-up time). Therefore you need to set up
a user account with an authorization profile in which the interface access
is enabled.
For more detailed information on the mode, the command set, the connection pos-
sibilities and property management systems please go directly to
Tip:
The User alarm event message can be generated from any internal termi-
nal using the command *77 [nnnn]. The parameter nnnn is optional and
has a value range from 0000 to 9999. Together with a connected applica-
tion various control and messaging functions can be implemented, e.g.
minibar items to be replaced in a hotel room, etc.
Funciones y prestaciones del sistema a partir de R2.1
syd-0370/1.2 – R2.1 – 07.2012
Prestaciones
Office 45
557
Tabla de contenido
